This is useful if you are wanting to provide more low end on a specific instrument as an effect. To load an output routing preset, simply select the preset and press load.Today we are going to be looking at the Sub-Octaver. This allows us to save and recall our output routing. If you are using a stage box, make sure you select the correct AES50 port and channel numbers to be able to record those. If you are wanting to record your 32 channels into your DAW, set these to Local if you are using the local inputs. The Card Out tab gives us our selection to where to source for the outputs going into the expansion card. Lastly, if you are using the Ultranet to deliver audio to your Turbo Sound speakers, you will want to control that via the LCD screen on the board, as the board will have more options than the XMix App will give you. There is no delay available for these outputs. Similar to the Aux Out tab, we have the same output signals, taps and the polarity reversal.
This can either be used for the PM monitoring system, the Ultranet speaker distribution from Turbo Sound or a combination of the two. The P16 is our tab for the Ultranet output on the board. One thing to note is that there is no delay for these outputs. To engage the delay, click the delay button and use the rotary knob to set the specific delay time. Delay allows us to delay each output from 0. This allows for a Post Fader control with muting, but with the options of Pre Fader. Tap gives us a few different options as to where to tap the source. Selection of the Card allows us to route the expansion card channels into the channels of the X The Analog Out tab of the routing section allows us to select what is being sourced for the 16 XLR outputs on the X Output 1 corresponds to XLR Out 1. The X32 and M32 series offer the use of an expansion card on the console. This selection gives you the option of routing the AES50 channels coming into the A-Port on the back of the console.
#Behringer x32 tutorial full
Of course, this is referring to the X32 Full Size, if you have other units, you may not have these options available to you.
The Home tab of the Routing Section corresponds to the channels on the physical console and they are broken into Inputs,and Local corresponds to the physical XLR jacks on the X32 unit. With all of these inputs, the console can handle a total of 38 channels when we include the 6 aux channelsbut the majority of the channels are routed in blocks of 8.
#Behringer x32 tutorial full size
The Behringer X32 has a lot of input and outputs that we have at our disposal including all of these on the Full Size console. The Routing Tab is a very important section as we can do a lot of good and a lot of harm from this very screen.